Відео

Thanks for this. I printed a complicated spool rewinder and not only was it complicated but I didn't use PETG and parts kept snapping off(my mistake but frustrating). This is simple and quick.

little hot glue can help hold things in place. its what I do

This is not new tho, if done correctly you can make sturdy objects with internal structure. Similar to yours but for all around.

First of all, great video! Really easy to understand and follow I just want to know, what voltage are those capacitors you're using here?

hi. was considering building the LayerFused X301. is it still worth building it in 2024? would the specs match up with current off-the-shelf products around it's price range - $1000 according to the excel sheet provided - like the Creality K1 Max CoreXY - how is the X301 compared to that? it seems the LayerFused shop site is down - meaning the parts required (from them) are unavailable - making the build difficult. and does the excel sheet consist of everything needed to build the X301? what do you suggest? should i build or buy?

for whatever it's worth, they likely tested in a more aggitated bath of water. From how easily those tore apart if the water were even slightly more aggitated it would have begun to crumble and "turn to dust" on it's own. They were likely testing in conditions that would intentionally accelerate degradation so that you could see years and years of degradation over a few days. That sounds like a long time, but dead trees, fallen branches, etc. also last years and years. Now whether or not this was *_bio_* degradation or not is another story. In landfill conditions I believe that, yes, PLA can biodegrade quite successfully, but I'm not sure about how well it biodegrades otherwise. I'd like to assume that once it gets to fine enough particles then, even if it doesn't naturally biodegrade, things eating and processing it would finish the job, but it's hard to say.

Is there a diagram anywhere on the belts and how they are routed, its a bit hard to follow on the video, thanks for sharing this design

Making a three D printer is. Definitely not a diy job its a precision job. 😊😊🎉🎉

I use non diluted alum with fantastic results, typically after 24 hours I have clean clear non diluted IPA.

how is that 400mm , 400mm is very small pls help

Это писец, пихать USB шнур в устройство.

I was with you until the needle nose pliers came out. Definitely worth paying for the crimp tool if you are doing terminations that matter. And if they don’t really matter, then use the cheap auto style barrel connectors.

2024 hi there everyone very interested

But the alluminum extrusion is actually cheaper by the kg, almost 40-50% cheaper than the filament cost alone.

Nephew looks married man with no kids to stress him up

Is there a file available for the printing of the casing? Just got my first one to work! Great stuff. The fix with the duplicate pins as @gazzl3 mentioned works!

How many volts is the capacitor? cheers

Why not just use a cheap cooler instead of dealing with insulation?

I am just like all these people in the comments, I was super frustrated I closed prompt your face many times tried to update my drivers, I restarted my computer lol and then I finally found this video. This is such a simple fix I can't believe that I didn't even attempt to think about it. Thank you so so very much!😅

my stepper vibrates a lot, i dont know why

They're really not that expensive, anywhere from 30 to 50 dollars, it won't break the bank.

Good job!!

Couple problems, water will not go to the bottom since it mixes with the IPA, and this should remove particulates but not necessarily organic solvents that can be invisible and accumulate overtime (need to doublecheck this). Basically the moment I saw you say that the water will not be in the final mixture because of the decanting I realized I actually have to discard the whole explanation because you have not researched any of this. Sorry but putting advice like this without checking it properly is quite dangerous.

Somehow I messed up my home offsets mucking around the settings. It got set to -17mm so 0 was printing wayyy to high. Thanks for pointing me in the right direction. (M206 Z0)

Hello. I'm from Poland. I liked your project. Currently working on a vehicle that uses electric skateboard software and controllers. In the first version, the vehicle is controlled by a joystick connected to ESP32, which connects to ESP32 via WIFI. This works very nice! I thought it would be worth the vehicle that was driven using this ESP32-CAM. Could you suggest how to do this? I think that the current look of the code will not be suitable because the vehicle is supposed to appear behind a moving object and the current ESP32-CAM is not moving. It only does this when the object is moving. Stop and follow the object. It won't work for me. thank you for every tip.

Do you have a link for your 3d printed box for the STL file?

❤ “It’s not your fault” Needed to hear that

why have you removed the code from your site?

This is brilliant, PS I'm the paracord guy 😍

Can I run 2 sets of wire connectors to the ESP32 board to run 2 separate led strips going in different areas. Yes I will be adding power injection.

Does the capacitator you installed works as a fade out for the leds when the ESP32 is unplugged from the power? Thanks.

did they give the R number and value to change it too?

where can i find the design

shit .....

Thank you so much for making this content available for everyone sir!!!

Очень странная идея, что вода останется в осадке. Вода останется в спирте. После второй такой очистки придется доливать чистый спирт.

Would there be anyone out there that could offer a service to help compile and install klipper firmware onto a manta m8p with cb1?

the way you're leaving the cable-tie ends is a cutting hazard

A difference might have been easier to spot if there wasn't the infill showing through everywhere...

I was about to go and buy connectors for my speaker wires and it was going to be closed barrel, thanks now I will be using open instead.

Seems like monitoring the comments and posting video replies to those comments would be harder than posting twice a day. There's a lot of other things to do with your time.

SO... Why don't you include link to the Things page?

LETTTTS GOOOOOO THANK YOU SOOO MUCH

Hey, I love this idea and with summer coming up this will definitely be on my list of things to do. I was wondering (since this was posted 4 years ago) if you’ve posted anything else that might have any upgrades or anything that could be more modern if there is such an option with the improvement in tech over these years? :)

The Code of "RunoutAnywhere.ino" does not compile properly because the call to 'HTTPClient::begin' declared with attribute error: obsolete API, use ::begin(WiFiClient,url) leads to an error. The solution is to substitute 'http.begin(String(OCTOPRINT_BASE_URL) + String("/api/job"))' with 'http.begin(client, String(OCTOPRINT_BASE_URL)+ String("/api/job"))', and then the code compiles well. Thank you very much to the Author of the Code for let us participate of her or his work.

What is the power draw on these? You might be able to but some cheap solar path lights on sale to use as a power source.

very cool. Love all these vase mode hacks

Hi. I have Pre sonus Erie 5 and the re is no sound coming from speakers. I only hear sound when I plug in headphones. Any solution

Flash from Browser ua-cam.com/video/YLLGBM3i2aQ/v-deo.html

What soldiering iron do you use?